Our annual August Pre-Harvest auction will be held at the Wieman Auction Facility 1 mile south and ½ mile west on Highway 44 from Marion SD on:

Lunch by Presbyterian Church Ladies

07 JD 6330 CAH, MFD w/JD 563 Loader, 500 hrs; 00 JD 9400T, 3650 hrs, 4 hyd., Greenstar, 36" tracks; JD 6400 MFD, PQ, LHR, no cab, 640 loader; 01 CIH MX 240, MFD, 4600 hrs, 18.4 x 42 duals; 90 CIH 7110 MFD w/Westendorf TA46 loader; 93 CIH 5240 MFD, CAH, 3 pt; JD 4110 MFD, 3 pt, 140 hrs, w/JD 410 loader; JD 4440 CAH, QR, 9600 hrs.; JD 8440 CAH, 4x4; JD 4230 CAH, 3 pt; NH TC40 MFD, w/NH loader; 79 White 2-155 CAH, 3 pt; JD 4840, PS, 3 pt; 78 White 2-135 CAH, 3 pt; 98 CAT #55, auto shift, 3 pt, 4 hyds, PTO, 18" tracks, 3500 hrs; JD 4010 Diesel, 3 pt; Oliver 1650 Gas w/WF & Westendorf WL42 loader; IHC 4366 4x4; Iseki TS 2202 Diesel, 25 Hp, 430 hrs. w/loader; Ford 7600 CAH, 3 pt w/Westendorf TA 26 loader; 79 IHC 4386 w/Degelman 10’ blade; MF 3680 MFD, cab, 4700 hrs, 3 pt; NH 8160 MFD, cab, 3 pt; CIH 7110 CAH, 2 WD, 4 reverses, 3 pt; JD 8630 4x4, 4700 actual hrs, 2700 hrs on 50 Series motor w/6 way dozer blade; IHC 856 Diesel, sharp; AC 7050 CAH (engine bad); 77 JD 4230 CAH, QR, 9000 hrs w/JD 158 loader & grapple; 78 Case 1070 w/Dual 3100 loader; 67 IHC 706 German Diesel, WF, fenders; IHC 886 CAH, 3 pt; IHC 1086 CAH, 3 pt; IHC 656 Diesel, WF, 3 pt, 1275 original hrs, sharp; 69 IHC 856 Diesel, 3 pt, good TA, 9700 hrs.; JD 4100 MFD, w/3 pt and mower; JD 1070 MFD, 3 pt; IHC 5488 CAH, Duals, 8900 hrs.; 72 IHC 1066 cab, 3 pt, good TA; 87 CIH 2294 3 pt, CAH, 10,000 hrs w/GB 760 loader; 87 Case 2294 MFD, 9700 hrs; 70 Case 970 cab, PS, 8030 hrs; JD 4040 CAH, 3 pt, QR; Ford 3600 Diesel, WF, 3 pt; JD 4450 MFD, PS, 3 pt; 2 - JD 4440’s CAH, PS, 3 pt; 67 JD 4020 Diesel, PS, 3 pt, Hiniker cab; JD 4455, CAH, QR, 9000 hrs, 42" rubber, very good; 87 JD 4450, CAH, QR; 82 JD 4440, CAH, QR, 6400 hrs.; 82 JD 4040, CAH, PS, overhauled; 82 JD 4040, CAH, PS; 83 JD 4450, MFD, 7400 hrs., PS; 82 JD 4240, CAH, QR, 5600 hrs.; PAY LOADERS – SKID LOADERS – INDUSTRIAL: Gallion 160 motor grader w/14’ moldboard; Toyota 3500 lb Diesel forklift; Mark 6000 lb rough terrain forklift; Case 1816 Gas skid loader; Parson-Seaman 4x4 trencher-backhoe-cable plow w/ JD Diesel, 1400 hrs; 03 Case 221 D. pay loader, CAH, 1900 hrs, nice; 98 Bobcat 773 skid loader, 3600 hrs, 66" bucket; Case skid loader; 2000 JD 310E loader-backhoe, CAH, 4x4 extend-a-hoe, 1600 hrs; 1970 forklift 4x4, Diesel, 30’ lift; 2000 Gehl SL 4335 skid loader, 72" bucket, cab & heater, 4200 hrs; COLLECTOR TRACTORS – VINTAGE MACHINERY: IHC 1468 V8 Tractor, CAH, 3 pt, 6800 hrs, 3 hyds, 20.8 x 38 rubber, new clutch & TA, repainted, excellent condition; IHC 1568 V8 Tractor, CAH, 20.8 x 38 tires, 3 pt, 2 hyds, 5300 hrs, 200 hrs on new clutch, nice (both V8’s are farmer owned); Oliver 1855 Gas, MFD, 3 pt, very nice; 54 IHC Super MTA Diesel, WF, 3 pt, new rubber, runs great; 63 MF 35 Deluxe Gas w/ 3 pt; 66 Ford 6000 Diesel, WF, 3 pt; AC WD45 Diesel; JD 2010 w/loader & pallet forks; JD 420 w/WF, 3 pt; MM 335 Gas w/ 3 pt; IHC Super MTA Gas w/LPTO; IHC B414 Gas, WF, 3 pt; AC Model WD 45 Diesel, WF new tires & paint; JD 2510 Gas, NF, 3 pt; Case SC Gas, NF (loose will run); Case DC (motor stuck); JD 620 LP Gas, 3 pt, NF, runs; JD 70 Diesel, NF (not running); MH 3, NF (not running); JD #666 PT 6 bottom plow; IHC Super A w/1 row cultivator, 2 way plow, side mount mower & Woods belly mower; IHC 450 Gas, WF, runs good; 41 IHC Model H, 9sp, runs; 39 IHC F20, runs good; 36 IHC F20 w/FH loader, runs good; IHC 1256 Wheatland Diesel; IHC 300 Gas, NF, good TA; Oliver 99 Standard (motor stuck); MH 55 Standard (motor stuck); Case LA (not running); Cockshutt 80 (not running); IHC F20 (loose-not running); Oliver 770 Gas, NF, (CI grill); JD Model 50 Gas; 59 IHC 560 LP Gas, runs; AC WD45 Gas, NF, w/NI loader (water in oil); Oliver Super 55 Gas, WF, 3 pt; AC Model C w/belly mower; IHC Model H w/mower; IHC 300 Gas, new paint, tires & 3 pt; Case VAC (fire damage); IH 200 manure spreader; IHC Galvanized 4 wheel spreader; Dempster 2 R lister; IHC 530 spreader (for parts); 49 Chevy Truck w/9’ box & hoist, new paint; JD #44 plow 2x16; JD 4x14 mounted plow; 2 – JD 612 plows; IHC 560 Gas; IHC Model H, runs good, NF; IHC 460 LP Gas w/Dual 250 loader, NF & 2 pt; IHC Model M w/WF & Koyker K5 loader; JD 218 plow; Case 3 bottom PT plow; 48 Oliver 60 gas, NF, new clutch, battery-carb; steel wheel running gear; JD 1 row silage cutter; MF 97 Diesel, WF, PTO, runs; MH 44 Gas, Standard; Oliver 1650 Gas, NF, 3 pt; Oliver 66 Gas, NF; Oliver 770 Gas, NF, 3 pt, original; Oliver 880 Diesel, WF, new tires-good paint; IHC 806 Diesel, Wheatland; AC D-17 Gas, WF w/AC loader; Oliver 88 Gas, Standard; IHC Super C w/ 2 pt mower-repainted; IHC 1206 Diesel Wheatland, 2 PTO’s, fenders; Oliver 770 Diesel; Oliver 99 Gas Standard, unstyled; JD Model AW styled w/slant dash; JD 720 Diesel w/WF; JD Model D, unstyled;

95 Gleaner R62, 1368 hrs, chopper, duals, Cummins engine; 92 Gleaner R62 chopper, 30.5 x 32 rubber; 97 JD 9500, chopper, 1660 sep hrs; 88 JD 7720, chopper, 24.5 x 32 rubber; 88 JD 1660, rock trap, 2897 hrs.; 90 CIH 1660, rock trap, 3684 hrs.; 83 JD 7720, chopper, 24.5 rubber, hydro; 97 NH TR 89, chopper, tracer, 1938 hrs., 30.5 tires; 91 CIH 1680, chopper, duals, AFS, 4497 hrs.; 79 Gleaner MII Diesel, gear drive, chopper; 86 CIH 1660, rock trap; JD 6620 hydro; White 913 PU head fits 8560; 80 JD 7720 hydro, chopper, new bars & concaves; 81 JD 4420 gear drive, 3633 hrs, chopper; 79 JD 7720 hydro, chopper; 93 JD 9500, chopper; Gleaner F2 Diesel, gear drive w/Gleaner 15’ flex, 4RW corn head & dummy head w/PU; JD 7720 hydro, chopper; JD #4400 Diesel and Gas combines; 88 JD 7720 Titan II, 2800 hrs, chopper, DAM, 24.5 rubber; 81 Gleaner M2 Diesel; JD corn heads including: 443, (6) 444’s, (8) 643’s, 644, (5) 843’s, (3) 893’s, 1293; CIH corn heads including: 844, 944, 1044, 863, 884, (4) 1063’s, (3) 1083’s; JD flex heads including: 213, 215, 216, 220, 224, 918, 920, 925, 930, many late models; 96 JD 930 rigid head; CIH 1020 flex heads including: 20’, 25’, 30’; 06 Gleaner # 3000 corn head, 8RN; Gleaner LM 438A corn head, 4RW; Gleaner LM 315 flex; Gleaner LM 300 rigid, 15’ (no reel); Gleaner LM dummy head; Gleaner 8RN Hugger corn head; CIH 1015 dummy head; Gleaner R320 flex head (20’ for R Series); Gleaner 500 flex head, 17 ½’ R Series; Gleaner 400 rigid header, 27’ w/PU reel; Geringhoff 6RN corn head for IH; JD grain table w/pickup; Gleaner 320N Series flex head; MF 1163 corn head w/IH adapter; JD 454A & 853A all crop heads; Klaas 8RN corn head; 89 CIH 1640 chopper, rock trap, 4300 hrs, nice; CIH 1020 flex 20’ w/Cary air reel; A&L 356 grain cart; Dohrman 450 bu. grain cart; Parker 500 bu. grain cart; 2 – NI 2 R corn pickers; A & L Model 47 grain cart; Ficklin 425 bu. grain cart; JD 6600 Diesel gear drive, chopper; NH 6RN corn head; 80 JD 6620 , gear drive; 12 – Gravity Flow wagons (250 bu to 550 bu.); Kongskilde grain vac; NI 701 Unisystem w/ 13’ straight head (not running); NI 844 corn head; NI 868 silage chopper w/860 throat; NI adapters for NH heads; JD # 300 corn picker w/ 3 row 30" corn head, excellent; 98 JD 9610 chopper, DAM, F-A, 1879 hrs., 30.5 rubber, new motor-new concaves; JD 212 PU head, 5 belt; 91 IHC 1640 Specialty Rotor, 3600 hrs.; IHC 820 flex, 15’; 91 JD 9500, chopper; 91 and 96 JD 9600 combines, choppers, 30.5 x 32 rubber; 80 JD 7720 Hydro, HD rear axle; CIH 2208 corn head, 8 RN w/hyd. deck plates-knife rolls;

Puthoff Repair & Sales, Salem SD 605-425-2018 will sell the following: IHC 830 Forage Harvestor w/2R30 head; JD 3940 Forage Harvestor (no head); JD 444 corn head; NI 324 picker 2R30; Dual 5400 dump wagon; JD 530 baler w/Stover attachment (corn stalks); Gehl 520 V-rake, 12 wheel; Tonutti 5 wheel rake, 3 pt; Melroe 610 Bobcat skid steer, 54" bucket; IHC 560 Diesel Tractor, NF; IHC Super M Tractor w/Dual 325 loader, pump, valve; Feterl 12x82’ auger w/hopper; Feterl 10x76 auger w/hopper; Batco drive over hopper w/Electric drive & motor; Rem 2100 grain vac; Phares Wilkess 550 bu. grain cart; 2 – 200 bu. Gravity Flow wagons w/gears; Sunflower 4510 disk ripper, 7 shank 30, like new; Krause 4950 disk, 32’; JD 235 disk, 21’; Krause 2880 disk chisel, 18’; CIH 1250 grinder mixer w/scale;

Fred Loes Estate, Emery SD 605-999-3460 will sell: JD 7000 4RW planter; IHC 720 silage cutter; 1940 IHC Model M Tractor w/F-10 loader; 4 – attachments; 550 gal. diesel tank; Artzway 325 grinder; 3 pt hitch log splitter; Snapper LE 1515 riding mower, 42" deck; Snapper two stage snow blower; Snapper 5 Hp push mower, 21" deck; Lawnboy mower w/bagger, 21" deck; PT sprayer; 2 – IHC end gate seeders; MDS 3 pt bale fork; MDS bale spear, Global carrier; NH # 55 side delivery rake; IHC 735 Variwidth 5 bottom plow; Westendorf running gear; 7 section drag; IHC 4RW 133 cultivator; JD 4R Rotary hoe; JD 2 wheel manure spreader; IHC 45 field cult, 16 ½’; Feterl ruff feeder;

Bob and Theola Viet, Monroe SD 605-750-0232 or 605-297-3540 are retiring – will sell: 1997 Agco Allis 9455 FWA Tractor, duals, rock box, 200 gal. front mount herbicide tank, 1583 original hrs., 32 sp., 18.4 x 42 rubber, always shedded, excellent condition; 2001 Sunflower 1233 disk w/harrow, 24’; Wilrich PT chisel, 15’; Gehl 100 grinder mixer; IHC 550 plow, 5-16; Kewanee elevator, heavy chain, 44’, PTO; 8" incline auger w/hydraulic drive; Gehl 325 manure spreader w/double beater, tandem axle, slop gate & hyd. drive; Rural Mfg crowding cattle tub w/ 16’ run; 15 – Rural Mfg heavy corral panels and cart; 1 Rural Mfg walk thru gate; 1 Shopmade walk thru gate; 6 – Rural Mfg light panels; 10 – Shopmade corral panels (7 ½’) with cart; 18 – Shopmade corral panels (9’) with cart; numerous chains for gate ties; 5 – light duty 12’ corral panels; 7 – Sioux gates; 8 – 10 shopmade gates; 24 – cattle panels, 16’; Shopmade 3 pt hog carrier; 6 x 14 portable hog-livestock mover, 2 wheel 5 ton bulk bin w/6’ delivery auger; 3 – cement silage feed bunks 10’ w/cable and end caps; silage elevator; poly silage chute flow director; Sioux poly water tank; metal water tanks; 5 – wood feed bunks, 16’; 3 – square bale hay feeders; 2 – round bale hay feeders; Rural Mfg 8’ diameter sheep hay feeder; Sioux calving pen/headgate; JD & AC wheel weights; 300 gal. poly tanks w/3pt mount; LB White propane heater; Trojan LP tank heater;

Assman Implement, Mission SD 605-856-2305 will sell: 2000 Model MC 200 Daewoo wheel loader, SN: 140, cab, heat, 8’ 2.5 yard bucket, 20.5 x 25 tires, low hours; 1998 Case 621B wheel loader, cab, heat, 20.5 x 25 tires, 8’ 2.5 yard bucket, 6695 hrs; Farmall Model H Tractor, NF, good runner; Case 580B Tractor-Loader-Backhoe, Standard Hoe, SN: 5336786; IH 656 Gas Tractor, 15.5 x 38 tires, clean; Hesston 5800 baler, (rough) for parts; New CIH LX156 Self Leveling Loader w/96" bucket, mounts for CIH MXM Series and 125-155 Series; 90 Case 580K Tractor-Loader-Backhoe, 4x4 w/cab-ext. hoe;

Corey Schnabel Estate and Schnabel Family, Freeman SD will sell the following: JD 1600A Moco, 16’; Koehn 8RW Danish Tine cultivator; JD 235 Disk w/harrow, 21’; Foremost 450 cattle chute; Flail King 15’ stalk chopper; Hesston 30A stackhand; 2 – Badger 16’ silage boxes w/6 wheel gears; JD 535 round baler w/kicker; JD 510 disk ripper, 5 shank; 1977 JD 8630 Tractor, CAH, 3 pt, PTO, 18.4 x 38 duals, 50 Series engine; Hiniker 8RN cultivator, hyd. fold; Acco Guidance hitch; 4 seat bean bar; Kilbros 300 bu. gravity box w/gear;

Loren Odens Estate, Springfield SD (Bruce Odens-brother) cell# 916-765-1404 will sell: 1988 JD 7720 Titan II combine, 3891 hrs, chopper, fore-aft, 24.5 x 32 rubber, lots of updates; JD 643 HT corn head; 1994 JD 925 flex head, FA; Shopmade header trailer; CIH 5500 3 pt chisel plow, 13’; IHC 4500 PT field cultivator, 21’ w/harrow; JD 2600 plow, 6 bottom, toggle trip w/Buster Bar;

Hofer Dairy Farm, Bridgewater SD (Don Hofer) 605-648-3160 will sell: JD 5830 Self-Propelled silage chopper w/15’ Kemper head, RWA, kernel processor, Dura-Drum, innoculant applicator, 4589 hours; 2 – Badger 16’ Forage wagons, front unload w/roofs on Badger 6 wheel hears, nice; Richardton #700 silage dump wagon, nice; Betterbilt 3500 liquid manure tank top fill (no vacuum pump); CIH 1020 flexhead, 20’; IHC 766 Diesel w/WF, 3 pt; IHC 580 tandem axle manure spreader; IHC 45, 3 pt field cultivator, 16’; 2 – J-M 385 bu. gravity wagons on J-M gears; Parker 400 bu. gravity wagon on 12 ton gear; 3 pt anhydrous applicator; older 4 row stalk chopper; JD AW disk, 13’; IHC #55 3 pt chisel, 13’; Betterbilt 1500 liquid manure tank w/ vacuum pump; Glanzer Mfg. 10 section hydraulic drag cart w/ 10 spike sections; CIH 950 3 pt 8R planter frame; IHC #181 Rotary hoe, 3 pt, 25’; Stack mover 13’ x 29’, hydraulic drive; CIH 183 VT cultivator, 12RN w/shields; Lundell 300 bu. gravity wagon-gear w/hyd drive drill fill; Gehl 1580 silage blower, nice; IHC #46 square baler; IHC 810 grain head w/5 belt pickup; Mehlhaff swather cart; Glanzer Mfg. cart w/4 spike section; older Feterl 7"x42’ auger, PTO; CIH #735 Variable width 5 bottom plow w/ toggle trip; tank on cart for 3 pt anhydrous applicator; Glanzer Mfg. grain auger, hyd. 6"x36’;

Scott Supply Co., Mitchell SD 605-996-7704 will sell: 1999 Case IH MX200 Tractor, 3541 hrs., 480-80x46 rears, 380-85x34 front tires w/duals; 1994 CIH 1688 Combine, Specialty Rotor, rock trap, Stone drum w/Mud Hog rear assist, 4360 hrs.; Bushhog 21’ disk, hyd. fold w/6 tires, 20 ½ front blades, 21 ½ rear blades, 3 bar inland mulcher; Kewanee 19 ½ disk; CIH 496 disk, 22’, Cushion Gang; Great Bend 860 Loader, Magnum mts, 8 ½’ bucket, 4 tine grapple; CIH 520 Loader, 8’ bucket, 4 tine grapple, fits 5240; 2 – Woods Dual #255 Loaders w/CIH Maxxum mts, 8’ bucket, 4 tine grapple; 1991 CIH 5140 MFD Tractor w/cab, 9000 hrs., 18.4 x 38 rears; FH 940 Loader, 8’ scoop, 4 tine grapple; 1998 CIH 2388 Combine, 2253/1835 hrs., rock trap, Stone drum, field tracker, AFX Rotor, Cross Flow fan, 30.5 x 32 drive tires; 1998 NH 665 skid loader, 3200 hrs.; 2002 NH LS 180 skid loader, 1532 hrs., cab enclosure, heat, defroster; 1998 CIH 1020 flex head, 20’, 1 ½ cut, nice;

03 NH BR780 baler; 02 NH 688 baler, auto wrap; JD round balers including: 330, 510, 530, (5) 535’s, (2) 566’s; NI 485, 486 & 8465 round balers; NH 855, 660 round balers; Vermeer 605L baler w/net wrap, 5200 bales; CIH 8480 & 8465A balers; Gehl 1870 baler; Welger RP 15 baler; Vermeer 605L baler; 2 – NH 355 grinder mixers w/scales, nice; Gehl 65 grinder mixer; Artzway grinder; Bearcat 950 grinder mixer; Lorenz 100 grinder; JD 158 loader w/grapple; JD 158 loader w/8’ bucket; 98 JD 3970 silage cutter w/hay head; JD 3970 cutter-no heads; Gehl 1260 cutter w/ 3 RN corn head; Dual 300 loader; NH 892 cutter w/2RW corn head and HH; 8 – JD #38 & #3800 silage cutters, some with 2RW & 2RN corn heads; 20 – silage wagons 12’ to 16’ including Badger, Roorda, JD and others; NH #1033 bale wagon; SunMaster stalk chopper; Hesston 30 stackhand; FH bale accumulator and fork; JD #40 manure spreader; Feterl ruff feeder; KR 4 x 12 feeder wagon; Roorda 5 x 16 Hi Lift feeder wagon; Hesston 4590 square baler, like new; 8 – sickle mowers (IHC & JD mostly); Rowse 36’ dump rake; NH 304 side slinger spreader; 2 – Hi Roller roller mills, auger in and out, like new; Allied 595 loader w/grapple, JD mts; Richardton 1016 accumulator box; IHC 555 silage cutter; NH 40 & 99 silage blowers; Gehl 100 grinder; JD 660 manure spreader; JD 5400 SP silage cutter, 2WD; JD 4RN corn head for JD 5830 cutter; JD 3R30 and 3R 36 heads for JD 5830 cutter; New JD 740 Classic loader w/bucket; New JD 740 grapple fork; JD 158 loader; NH 890 silage cutter; Rodman 6 bale bale mover; Lucknow 4 auger mixer wagon w/ scale, 375 bu.; Vermeer R21 twin rake; Gehl 800 w/ 2RN corn head; Balzer accumulator box; Hesston 2R30" corn head; Gehl 2R36" CH; Richardton dump wagon; Hi Lift dump wagon; Greenleaf side dump wagon; CIH 8720 silage cutter w/ 3RN corn head; Roorda 180 manure spreader; Badger silage blower; 2 - JD 3960 chopper, no heads; Miller loader, JD mts; Westendorf WL64 loader w/grapple & joystick; Fox 3000 chopper w/5 heads; JD 3940 chopper w/2R30" CH; 3 pt post augers; KR 5x14 feeder wagon; Hesston 1170 Moco, 14’; Hesston 5500 R. baler; NH 770 silage cutter w/CH & HH; IHC stalk chopper; Steiger Dozer blade; older dozer blade (IH 8920 mts.); Balzer 15’ stalk chopper; IHC 575 manure spreader, slop gate; NH 782 chopper w/CH & HH; NH 770 silage cutter w/2RN CH & HH; JD 350 side rake; NI 704 Gas, Uni-Tractor w/ 2RW chopper head; IHC 518 silage cutter, 1R; 2 – JD 3 RN Yellow chopper CH; JD 200 bale wagon;

CIH #3900 RF disk, 21’ w/harrow; CIH 496 RF disk, 25’ w/harrow; CIH 3900 rigid 25’ disk w/harrow; White 271 RF disk, 22’; MF 820 disk, 21’; DMI Coulter Champ disk chisel; Glencoe 12’ PT chisel; JD 235 RF 21’ disk; JD 7200 VAC 8RW planter; 2 – JD 7000 planters 8RW (1 w/dry fert & 1 w/liquid fert); IHC 490 disk, 32’; CIH 5400 drill, 20’, 3 pt; JD 7000 planter, 8RN; IHC #5500 chisel, 13’, 3 pt; IHC #485 disk, 22’; JD 2600 Reset 5x18 plow; IHC 55 chisel, 15’; Wilmer 4 ton fertilizer spreader; JD 1065 running gear; Melroe 103 spray coupe; White #549 plow, 6x18; JD #1600 chisel plow, 12’, 3 pt; JD 13’ single disk drill w/GSA; 03 Brillion 8 shank, PT zone builder; JD 230 disk, 22’ w/harrow; JD 1010 PT 21’ FC w/harrow; Rowse 700 dirt scraper; 8 ton running gear; Krause RF 32’ disk w/harrow; 06 FarmKing 3 pt, finish mower, 60"; 15 – row crop cultivators 8 to 12 row; 6 – assorted plows; Wilrich 20’ FC # 2500 w/mulcher; 3 pt tree disk; 3 pt blades; 12 – grain augers 6", 8" & 10", various lengths; JD 7000 planter, 6R30; DMI #530B deep till; White 271 RF 23’ disk; Melroe 244 drill, 13’ w/GSA; JD AW disk, 15’; Feterl rotary grain screener; JD 2600 plow, 5x18, AR; JD 315 tandem disk; 91 Krause 4950 disk, 27’ w/mulcher; IHC 620 press drill, 14’; IH #490 disk, 20’; Brillion 6 shank zone builder; White 271 disk, 25’; JD #1000 FC, 32’; 10 ton running gear; 3 pt post augers; IHC 800 planter, ARW; IHC 22’ FC, 3 pt; IHC 475 disk, 19’; White 14’ PT chisel; JD 1710 disk chisel, 13 shank; CIH #14 V ripper, 5 shank, 3 pt; IHC 400 planter, 4RW, dry fert.; 98 TopAir TA 1100 gal. sprayer, 60’ boom, foam marker, Raven 440; Donahue implement trailer; IH 470 disk, 18’; 6’ rotary mower; Red Devil 8’ snow blower; JD 350 bale elevator, 52’; 2 – Electric running gears; Stanhoist 50’ elevator; 7 section drag; New 10’-12’ box blades; 3 reel type rock pickers;

97 Peterbilt flattop, sleeper, 425 CAT, Super 10 sp, 191" WB; 99 Freightliner FLD 120 Semi w/sleeper, 500 Detroit Diesel, Super 10 sp.; 74 Chevy C70 truck 18’ box & hoist, pusher axle; 97 Dakota grain trailer, 24’ single axle, roll tarp, Ag hoppers; 04 Kubota RTV 900 Diesel utility vehicle; 20’ & 25’ homemade header trailers; 84 GMC Brigidaire Truck 20’ steel box-hoist, Cummins Diesel, steerable pusher axle; 88 Yamaha 225 ATV 4 wheeler; 72 Ford F700 Truck Tractor; S&S 24’ x 8’ enclosed trailer, wired for 110, tandem axle, steel deck w/ D rings; 1980 GN 6 x 14 stock trailer; 91 K & O 6’ 8" x 20’ GN stock trailer; 99 IHC 8100 day cab Semi Detroit Diesel, 10 sp., 150" WB, 144,000 miles; 93 Merritt 42’ x 96" air ride, hopper bottom trailer w/roll tarp; 79 Hawkeye 42’ hopper trailer w/ new roll tarp; Homemade 24’ GN dually trailer; Homemade 16’ GN trailer; Keifer 16’ GN flatbed trailer; 97 Ford F150 Pickup 4x4, V8, auto; 93 Ford F150 4x4, extended cab; 84 Ford 9000 dump truck, twin screw, 13 sp., 350 Cummins; 69 Ford Truck 16’ box & hoist; 92 Cadillac Fleetwood car; 75 Chevy C60 Truck w tag axle & 22’ box & hoist; 89 Jetco 22’ hopper grain trailer, single axle, new tarp & paint; Shopmade 24’ pintel hitch, 3 axle flatbed w/ramps; 96 Ford F150 pickup, 187,000 miles; 67 IHC 1600 truck V8 w/ 16’ box; 2 wheel 12’ flatbed; 87 Cornhusker 42’ grain trailer, convert hopper; 72 Chevy C50 truck w/16’ box & hoist; 92 Suzuki 250 ATV w/sprayer; 97 Freightliner FLD 120 Semi-Sleeper, Detroit 500, 10 speed, nice; 2 – 1999 IH 9400 Semi’s w/ Pro sleeper, CAT Diesel, 10 speed, good rubber, 800K miles; 1997 Ford Aero Max Semi w/ sleeper, N14 Cummins 500 Hp, only 85,000 miles on new engine, new rubber, sharp; 78 Chevy C60 Truck, 366 V8, 5-2 sp. w/18’ silage box-hoist, lots of updates; 77 White RoadBoss Semi, 290 Cummins;

Coats air tire machine; plasma cutter; Delta pickup tool box; 5 – silage conveyors w/motors (to 20’ long); large assortment of truck-farm tractor-combine tires; tractor duals and accessories; planter trash whippers & attachments; 1000+ steel fence posts; Turbo setup for JD 329 engine; exhaust manifold and turbo for JD 4440; Dewald chop saw; Richie cattle waterer; Coleman 5000 watt generator; assorted tractor weights; 3 pt rock picker; 4 ton bulk bins; 200 cattle & hog panels; hog feeders; Jet pump; 10 – porta huts; pallets of 2" lumber; 2 – LowPro 72" dirt buckets; 2 – 74" dual cylinder rock grapples; HD bale spear; 2 - 48" pallet forks; air compressor; fuel tank w/ electric pump; 70 – new wood posts; 250 – wood posts; 40 – metal gates, various sizes; 2 pt hitch post driver; 4x4 lumber; 1200 gal. bulk tank w/truck bed; grain bin roof; 20 & 30 ton truck hoists; wide front for IHC 560; 2 – 27" Butler drying fans, natural gas; bin unloading tubes w/augers 6" & 8"; Bohlman cement water fountain; 3 pt bale carrier; 3 pt pig carrier; mineral feeders; electric fence post; many other machinery parts and repairs; 2 round bale feeders; Dynamark 18 hp riding mower w/sprayer; concrete meshing; 2 – steel I beams 10" x 24’; 3 pt quick hitch; 20’Grain box w/ twin cylinders hoist & tarp; Harvestor silo unloader, chain type; JD 525 frt. deck mower; some tools; grain bin sweep for 30’ bin; New Sandland Mfg. HD cattle work tub w/chute – all portable;

Auctioneers Note: Another large interesting sale! Misc. sells at 8:30 AM sharp with 3 rings and Machinery sells at 9:15 AM with 2 auction rings all day. South Dakota sales tax will be charged. This ad is subject to additions and deletions. All consignments must have been approved by the Wieman’s. We have excellent loading and unloading equipment. We appreciate your business. We are in our 59^th year of selling. Honest and fair treatment to all. Financing and trucking available. Sorry we are full! Come prepared to buy! (Welcome to the "Machinery Mall of South Dakota").

MARION SD 605-648-3111 or 1-800-251-3111

AUCTION SITE: 605-648-3536 or 1-888-296-3536

EVENINGS: Richard Wieman 605-648-3264 Mike Wieman 605-297-4240

Ryan Wieman 605-648-2970 Kevin Wieman 605-648-3439

Derek Wieman 605-660-2135 Gary Wieman 605-648-3164

For a detailed ad and some pictures call our office or visit our website at: www.wiemanauction.com

e-mail address: wiemanauction@goldenwest.net

[ Home ] [ Up ] [ Auction Results ] [ Real Estate for Sale ] [ Meet the Staff ] [ Services ] [ Aerial Sale Pictures ] [ Contact Us ]

Last modified: 08/01/08